Handset Settings - AT&T SL82318 - DECT 6.0 Digital Three Handset Answering System User Manual

Handset settings

>
DIRECTORY
CALL LOG
>
DIRECTORY
CALL LOG
>
RINGER VOLUME
RINGER TONE
RINGER VOLUME
Handset settings
Using the feature menu, you can customize many
of the telephone's settings.
1. Press MENU/
the phone is not in use) to enter the feature
menu.
DIR /
2. Use
to be changed. When scrolling through the
menu, the top menu item is always highlighted
with a > symbol.
/SELECT to select the highlighted
3. Press
MENU
item.
NOTE: Press
up to the previous menu or exit the menu display. Press
and hold
OFF
Ringer volume
Using this menu, you can set the ringer volume
level (1-6), or turn the ringer off. When the ringer is
turned off, will appear on the handset screen.
To adjust the RINGER VOLUME:
1. Press MENU/
the feature menu.
2. Use DIR /
VOLUME, then press
3. Press DIR /
level.
/SELECT to save your preference and
4. Press
MENU
return to the feature menu.
-OR-
When the handset is in idle mode, press the
VOLUME buttons on the right side of the handset
to change the ringer volume.
NOTE: The ringer volume also determines the ringer
volume of intercom calls (pages 27-28) and the paging
tone for the handset locator feature (page 23). If the
handset ringer volume is set to off, that handset is
silenced for all incoming calls and paging.
16
when in idle mode (when
SELECT
CID to scroll to the feature
/CLEAR to cancel an operation, back
OFF
/CLEAR to return to idle mode.
when in idle mode to enter
SELECT
CID to scroll to >RINGER
/SELECT.
MENU
CID to sample each volume