Mechanical; Chassis Description; Dimensions And Weight; Table 3. R410 Overall Dimensions And Weight - Dell External OEMR R410 Technical Manual

Dell

3 Mechanical

3.1 Chassis Description

The PowerEdge R410 chassis design provides customers low-cost compute power with some hardware
redundancy ability. It is a new chassis design for two incoming chassis offering cabled hard drive with
LED module, and high-availability features such as hot-plug hard drives and LCD module. Features
include four 3.5‖ SATA or SAS hard drives (cabled or hot-swap), power supply (non-redundant or
redundant), dual Gigabit LOMs without TOE acceleration, four DIMM slots support each CPU, TPM,
one riser card for optional PCIe expansion card, optional iDRAC6 Enterprise and iDRAC6 Express card
mounted on planar without PCI slot occupied, and support 11G slim static and slim sliding rails.

3.2 Dimensions and Weight

Table 3 provides the overall dimensions and weight for the PowerEdge R410 server.
Figure 1 details the dimensions of the PowerEdge R410 server.
Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.
PowerEdge R410 Technical Guide
R410 Overall Dimensions and Weight
Table 3.
Dimension (HxWxD)
(without ear, without
bezel)
Maximum Weight
Dimensions (mm)
Xa Xb Y
482.4 434.0 43.0
R410 Detailed Dimensions
Figure 1.
43.0 x 434.0 x 627.1 (mm)
1.69 x 17.09 x 24.69 (in)
15.9Kg/35.02lbs
Za Za
with without Zb*
bezel bezel
35.0 20.1 606.0 641.9
Zc
14