Rails And Cable Management; Readyrails Sliding Rails; Readyrails Static Rails; Fans - Dell External OEMR R410 Technical Manual

Dell

3.8 Rails and Cable Management

3.8.1

ReadyRails Sliding Rails

TM
ReadyRails Sliding Rails for 4-post racks support includes:

Toolless installation in 19‖ EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks

Tooled installation in 19‖ EIA-310-E compliant threaded hole 4-post racks (requires the 1U
Threaded Rack Adapter Brackets Kit)

Full extension of the system out of the rack to allow serviceability of key internal components

Optional cable management arm (CMA)
Rail depth and adjustment ranges are as follows:

Rail depth without the CMA: 714 mm

Rail depth with the CMA: 835 mm

Square-hole rack adjustment range: 686-883 mm

Round-hole rack adjustment range: 672-876 mm

Threaded-hole rack adjustment range: 651-897 mm
3.8.2

ReadyRails Static Rails

TM
ReadyRails Static Rails for 4-post & 2-post Racks support:

Toolless installation in 19‖ EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks

Tooled installation in 19‖ EIA-310-E compliant threaded hole 4-post and 2-post racks
Rail depth and adjustment ranges are as follows:

Rail depth: 622 mm

Square-hole rack adjustment range: 608-879 mm

Round-hole rack adjustment range: 594-872 mm

Threaded-hole rack adjustment range: 604-890 mm

3.9 Fans

There are total of six fans with redundant PSU in the system and four fans with non-redundant PSU.
Figure 11 shows the R410 fans. The four fans at right are the fans for the system, especially for the
CPUs and memories. The two fans at left are there when the system is configured with redundant
PSU. They cool down the redundant PSU.
PowerEdge R410 Technical Guide
Left Side View
Figure 9.

Figure 10. Right Side View

18