Mechanical; Chassis Description; Dimensions And Weight - Dell POWEREDGE R410 Technical Manualbook

PowerEdge R410 Technical Guidebook
4

Mechanical

4.1 Chassis Description

The PowerEdge R410 chassis design provides customers low-cost compute power with some
hardware redundancy ability. It is a new chassis design for two incoming chassis offering cabled hard
drive with LED module, and high-availability features such as hot-plug hard drives and LCD module.
Features include four 3.5" SATA or SAS hard drives (cabled or hot-swap), power supply (non-
redundant or redundant), dual Gigabit LOMs without TOE acceleration, four DIMM slots support each
CPU, TPM, one riser card for optional PCIe expansion card, optional iDRAC6 Enterprise and iDRAC6
Express card mounted on planar without PCI slot occupied, and support 11G slim static and slim sliding
rails.

4.2 Dimensions and Weight

Development Model
Name Number
The PowerEdge
PE R410
R410
Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.
Dell
Table 3.
Dimension (HxWxD)
(without ear, without
bezel)
Max Weight
Table 4.
Dimensions (mm)
Xa Xb
482.4 434.0
Figure 1. R410 Top and Side Measurement Key
R410 Dimensions
43.0 x 434.0 x 627.1 (mm)
1.69 x 17.09 x 24.69 (in)
15.9Kg/35.02lbs
Detailed Dimensions
Za Za
Y with without
bezel bezel
43.0 35.0 20.1
Note
Max Sys
Zb* Zc
Weight
606.0 641.9 15.9Kg/35.02lbs
Chassis
U
1U
7