Dell
11.5 LED Indicators
LED indicator for hot-
LED indicator for cabled
swap HDD configuration
HDD configuration
Figure 24. LED Indicators
A green LED located on the system control panel in the front of the enclosure indicates when activity
occurs on any integrated SATA device connected to the on board SATA ports. Using an add-in SAS
6/iR card, the HDD LED is also activated.
11.6 Optical Drives
R410 supports a SATA interface DVD-ROM or DVD+/-RW.
Refer to Table
2.
11.7 Tape Drives
R410 does not support an internal backup device. Only external backup device is supported.
Refer to Table 2 for the supported devices.
PowerEdge R410 Technical Guide
41
Need help?
Do you have a question about the External OEMR R410 and is the answer not in the manual?
Questions and answers