How Low Should You Go - Eagle FISHEASY 320C Installation And Operation Instructions Manual

be displayed on the sonar's screen. Use caution when routing the trans-
ducer cable around these wires.
CAUTION: Clamp the trans-
ducer cable to transom near
the transducer. This will help
prevent the transducer from
entering the boat if it is
knocked off at high speed.
Good
location
Poor angle

How low should you go?

For most situations, you should install your Skimmer transducer so
that its centerline is level with the bottom of the boat hull. This will
usually give you the best combination of smooth water flow and protec-
tion from bangs and bumps.
Transducer
centerline
Align transducer centerline with hull bottom.
Good location
Good and poor transducer locations.
Good location
Poor location
Transom
Hull bottom
14