1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press
Depth Range - Automatic
When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A blue bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press
Depth Range - Manual
You have complete control over the range when the unit is in the man-
ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
MENU
MENU
The Depth Range Control Scale.
|↓ to
D
C
EPTH
.
EXIT
|↓ to
D
R
EPTH
to clear the menu.
EXIT
67
|
.
ENT
URSOR
|
.
ENT
ANGE