Eagle FISHEASY 320C Installation And Operation Instructions Manual page 38

Front view (left) and side view (right) showing dimensions
of the FishEasy 320C when mounted on quick release bracket.
After drilling the hole, pass the connectors up through the hole from
under the dash. If you wish, you can fill in the hole around the cable
with a good marine caulking compound. (Some marine dealers stock ca-
ble hole covers to conceal the opening.)
Using the Quick Release Mounting Bracket
These units use a quick release mounting bracket. When you run the
cables through the bracket's cable slots, make sure you allow enough
slack for tilting the unit and attaching the connector. (The snug fit of
the push-on waterproof connector requires some force to attach.)
Align the bracket over the cable hole with the cable slots facing away
from you and fit the cable through one of the slots. Fasten the bracket
to the dash using the three screw holes.
107.5
[4.23]
12.09 [0.48]
76.9
[3.03]
156
[6.26]
Millimeter
[Inch]
36
82.7
[3.26]
70.3
[2.77]