Eagle Cuda 300 Portable Installation And Operation Instructions Manual page 18

Transducer aimed
too far back
Full fish arch
Transducer angles and their effects on fish arches.
If the arch slopes up – but not back down – then the front of the trans-
ducer is too high and needs to be lowered. If only the back half of the
arch is printed, then the nose of the transducer is angled too far down
and needs to be raised.
NOTE:
Periodically wash the transducer's face with soap and water to remove
any oil film. Oil and dirt on the face will reduce the sensitivity or may
even prevent operation.
Partial fish arches
Proper transducer angle
12
Transducer aimed
too far forward