Bracket Installation - Eagle Cuda 300 Portable Installation And Operation Instructions Manual

Eagle fish finding sonar installation and operation instructions
Table of Contents

Advertisement

Available languages

Available languages

Bracket Installation

Recommended tools for this job include: drill, 1" (25.4 mm) drill bit,
screwdriver. Required supplies for this job include: high quality, ma-
rine grade above- or below-waterline caulking compound, three #10
stainless steel screws. Screw length and type should be suitable for the
material on which you intend to mount the bracket.
Mount the unit in any convenient location, provided there is clearance
when it's tilted for the best viewing angle. You should also make sure
there is enough room behind the unit to attach the power/transducer
cable. (See the following drawings, which show the dimensions of a
gimbal-mounted Cuda 300 sonar unit.)
Front view (left) and side view (right) showing dimensions
of the Cuda 300 when mounted on quick release bracket.
107.5
[4.23]
12.09 [0.48]
76.9
[3.03]
156
[6.26]
Millimeter
[Inch]
15
82.7
[3.26]
70.3
[2.77]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents