[Audio Settings]; [Bd/Dvd Viewing Settings] - Sony BDV-EF220 Operating Instructions Manual

[Frame]: The picture, including subjects that do
not move dynamically, is output in high
resolution.

[Audio Settings]

x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
[Off]: No compression of dynamic range.
x [Attenuate - AUDIO]
Distortion may occur when you listen to a
component connected to the AUDIO (AUDIO
IN L/R) jacks. You can prevent distortion by
attenuating the input level on the unit.
[On]: Attenuates the input level. The output
level will decrease at this setting.
[Off]: Normal input level.
x [Audio Output]
You can select the output method where the
audio signal is output.
[Speaker]: Outputs multi-channel sound from
the system's speakers only.
[Speaker + HDMI]: Outputs multi-channel
sound from the system's speakers and 2-channel
linear PCM signals from the HDMI (OUT) jack.
[HDMI]: Outputs sound from the HDMI (OUT)
jack only. Sound format depends on the
connected component.
• When [Control for HDMI] is set to [On] (page 40),
[Audio Output] is set to [Speaker + HDMI]
automatically and this setting cannot be changed.
• When [Audio Output] is set to [HDMI], the output
signal format for the "TV" function is 2-channel
linear PCM.
x [Sound Effect]
You can set the system's sound effects (SOUND
MODE setting
(page 19))
[Sound Mode On]: Enables the surround effect
of the sound mode (page 19). The sampling
frequency upper limit is set to 48 kHz.
[Off]: The sound effects are disabled. You can
hear sound as it is recorded.
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see "Setting the
Speakers" (page 32).
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
You can select the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
"Language Code List" (page 53).
x [Audio Language]
You can select the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given
priority in the disc is selected.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
"Language Code List" (page 53).
on/off.
39
GB