Configuring The Printer Driver For The Options Installed On The Machine - Sharp MX-M260 Software Setup Manual

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
CONFIGURING THE PRINTER DRIVER FOR
THE OPTIONS INSTALLED ON THE MACHINE
After installing the printer driver, you must configure the printer driver settings appropriately for the
options that have been installed and the size and type of paper loaded in the machine. Follow the
steps below to configure the printer driver.
If the PPD driver is installed, see "When the PPD driver is installed" (page 26).
Note
When the PCL printer driver or PS printer driver is installed
1
Click the [Start] button (
[Control Panel], and then click
[Printer].
• In Windows XP/Server 2003, click the
[start] button and then click [Printers and
Faxes].
• In Windows 2000, click the [Start]
button, select [Settings], and then click
[Printers].
If [Printers and Faxes] does not
Note
appear in the [start] menu in Windows
XP, click the [start] button, click
[Control Panel], click [Printers and
Other Hardware], and then click
[Printers and Faxes].
2
Open the printer properties
window.
(1) Right-click the printer driver
icon of the machine.
(2) Select [Properties].
3
Click the [Configuration] tab.
Set the printer configuration properly.
Otherwise, printing may not take place
correctly.
24
4
), click Click the [Auto Configuration]
button.
The settings are automatically configured
based on the detected machine status.