Sharp MX-M260 Software Setup Manual page 17

Printing using the IPP function and the SSL function
The IPP function can be used to print to the machine over a network using HTTP protocol.
When the machine is in a remote location, this function can be used in place of the fax function to print
a higher quality image than a fax. The IPP function can also be used in combination with the SSL
(encrypted communication) function to encrypt the print data. This enables secure printing with no
concern that the data will be leaked to others.
To use the SSL function, configure the "SSL Settings" in the administrator settings of the machine.
Note
To configure the settings, see "SYSTEM SETTINGS (ADMINISTRATOR)" in the Operation Manual.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax
Driver] button on the "Disc 2" CD-ROM.
*The above screen appears when using the
"Disc 1" CD-ROM.
2
Click the [Custom installation]
button.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
3
When you are asked how the
printer is connected, select [IPP]
and click the [Next] button.
4
If a proxy server is used, specify
the proxy server and click the
[Next] button.
To specify a proxy server, select [Print via the
proxy server] and then enter the [Address] and
[Port number].
15