Sharp MX-M260 Software Setup Manual page 12

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
2
Click the [Standard installation]
button.
When [Custom installation] is
Note
selected, you can change any of the
items below. When [Standard
installation] is selected, the installation
will take place as indicated below.
• Machine connection method: LPR
Direct Print (Auto Search)
• Set as default printer:Yes (excluding
the PC-Fax driver)
• Printer driver name: Cannot be
changed
• PCL printer display fonts: Installed
If you selected [Custom installation],
select [LPR Direct Print (Auto Search)]
and click the [Next] button.
If you selected other than [LPR Direct
Print (Auto Search)], see the following
pages:
• LPR Direct Print (Specify Address):
page 13
• IPP: page 15 •Shared printer: page 22
• Connected to this computer: page 17
10
3
Printers connected to the
network are detected. Select the
machine and click the [Next]
button.
• If the machine is not found, make
Note
sure that the machine is powered on
and that the machine is connected
to the network, and then click the
[Re-search] button.
• You can also click the [Specify
condition] button and search for the
machine by entering the machine's
name (host name) or IP address.
☞
Checking the IP address of
the machine (page 6)
4
A confirmation window appears.
Check the contents and then
click the [Next] button.