Installing The Printer Driver / Pc-Fax Driver; When The Machine Is Connected To Anetwork; Standard Installation - Sharp MX-M260 Software Setup Manual

INSTALLING THE PRINTER DRIVER /
PC-FAX DRIVER
To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section
depending on whether the machine is connected to a network or connected by USB cable.
☞
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 17)
WHEN THE MACHINE IS CONNECTED TO A
NETWORK
This section explains how to install the printer driver and the PC-Fax driver when the machine is
connected to a Windows network (TCP/IP network).
Supported operating systems: Windows 2000*/XP*/Server 2003*/Vista*/Server 2008*
* Administrator's rights are required to install the software.
• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.
Note
• To print to the machine over the Internet using the IPP function when the machine is
installed in a remote location, or to print using the SSL (encrypted communication)
function, see "Printing using the IPP function and the SSL function" (page 15) and install
the printer driver or the PC-Fax driver.
• The installation procedure in this section is for both the printer driver and the PC-Fax driver,
although the explanations are centered on the printer driver.

Standard installation

When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax
Driver] button on the "Disc 2" CD-ROM.
*The above screen appears when using the
"Disc 1" CD-ROM.
9