Table of Contents
Related Manuals for Alliance Laundry Systems HC100
Summary of Contents for Alliance Laundry Systems HC100
- Page 1 Washer Extractors HC60, HC65, HC75, HC100 HC135, HC165 for corresponding “CHC” and “IHC” models, see page 6 for complete model list. Technical specifications Installation instructions Maintenance Part No. D0285R10 Code: 249/00306/20 March 2012...
-
Page 3: Table Of Contents
Mounting Bolt Hole Locations for machines, HC65, IHC014, IHC065 ... 29 Mounting Bolt Hole Locations for machines, HC75, IHC018, CHC018, IHC075 ... 30 Mounting Bolt Hole Locations for machines, HC100, IHC025, CHC025, IHC100 ... 31 Mounting Bolt Hole Locations for machines, HC135, IHC030, IHC135 ... 32 Mounting Bolt Hole Locations for machines, HC165, IHC035, CHC035, IHC165 ... - Page 4 Electrical Specifications HC60, IHC012, IHC060 ... 39 Electrical Specifications HC65, IHC014, IHC065 ... 40 Electrical Specifications HC75, IHC018, CHC018, IHC075 ... 41 Electrical Specifications HC100, IHC025, CHC025, IHC100 ... 42 Electrical Specifications HC135, IHC030, IHC135 ... 43 Electrical Specifications HC165, IHC035, CHC035, IHC165 ... 44 Liquid soap connection (option) ...
-
Page 6: Model Numbers
Model Numbers Build-up xHC060yyHyyyyyy xHC065yyHyyyyyy xHC075yyHyyyyyy xHC100yyHyyyyyy xHC135yyHyyyyyy xHC165yyHyyyyyy xHC012yyHyyyyyy xHC014yyHyyyyyy xHC018yyHyyyyyy xHC025yyHyyyyyy xHC030yyHyyyyyy xHC035yyHyyyyyy Model numbers HC60 HC65 HC75 HC100 HC135 HC165 HX25 HX35 IHC012ANH IHC025ANH IHC012MNH IHC025MNH IHC012MCH IHC025MCH IHC012MDH IHC025MDH IHC012MEH IHC025MEH IHC012MLH IHC025MLH IHC012MXH IHC025MXH IHC012MYH... - Page 7 IHC060ZNH IHC100SYH IHC065ANH IHC100ZNH IHC065MNH IHC135ANH IHC065MCH IHC135MNH IHC065MDH IHC135MCH IHC065MEH IHC135MDH IHC065MLH IHC135MEH IHC065MXH IHC135MLH IHC065MYH IHC135MXH IHC065SCH IHC135MYH IHC065SDH IHC135SCH IHC065SEH IHC135SDH IHC065SRH IHC135SEH IHC065SLH IHC135SRH IHC065SXH IHC135SLH IHC065SYH IHC135SXH IHC065ZNH IHC135SYH IHC075ANH IHC135ZNH IHC075MNH IHC165ANH IHC075MCH IHC165MNH IHC075MDH IHC165MCH IHC075MEH...
-
Page 8: Safety And Environmental Informations
Safety and Environmental Informations Safety CAUTION LABELS Please familiarize yourself with the following standard warning symbols. They are used throughout this manual and on the equipment to alert you to possible hazards. Anyone operating or servicing this equipment must understand these symbols and must follow all safety rules in this manual. -
Page 9: Environmental
Environmental Disposal of Unit This appliance is marked according to the European directive 2002/96/ EC on Waste Electrical and Electronic Equipment (WEEE). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. -
Page 10: Explanation Of Safety Messages
Explanation of Safety Messages Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “WARNING,” and “CAUTION”) followed by specific instructions. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. DANGER Indicates an imminently hazardous situation that, if not avoided, will cause severe personal injury or death. -
Page 11: Important Safety Instructions
The gas is flammable, do not smoke or use an open flame during this time. 6. Do not allow children to play on or in the washer. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. -
Page 12: Save These Instructions
21. Loading door MUST BE CLOSED any time the washer is to fill, tumble, or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open. 22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. -
Page 13: Operator Safety
Operator Safety WARNING NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury. To ensure the safety of machine operators, the following maintenance checks must be performed daily: 1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. -
Page 14: Technical Data And Dimensions
Technical data and dimensions Technical data HC60, IHC012, IHC060 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Heating Packing dimensions Weight METRIC 1:11 1:10 5,5 kg 6,1 kg Diameter 530 mm Depth... -
Page 15: Dimensions Hc60, Ihc012, Ihc060
Dimensions HC60, IHC012, IHC060 Legend: metric mm [inches] 33 [1.3] 65 [2.56] 530 [20.87] 660 [25.98] 226 [8.9] 151 [5.94] 75 [2.95] 660 [25.98] 33 [1.3] 65 [2.56] 69 [2.72] 109 [4.3] 180 [7.09] 163 [6.4] 30 [1.18] 30 [1.18] 485 [19.09] 565 [22.24] 622 [24.49]... -
Page 16: Technical Data Hc65, Ihc014, Ihc065
Technical data HC65, IHC014, IHC065 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Steam connection Heating Packing dimensions Weight METRIC 1:11 5,9 kg 1:10 6,5 kg 7,2 kg Diameter 530 mm Depth... -
Page 17: Dimensions Hc65, Ihc014, Ihc065
Dimensions HC65, IHC014, IHC065 Legend: metric mm [inches] 33 [1.3] 65 [2.56] 530 [20.87] 660 [25.98] 226 [8.9] 151 [5.94] 75 [2.95] 660 [25.98] 33 [1.3] 65 [2.56] 69 [2.72] 109 [4.3] 180 [7.09] 220 [8.66] 30 [1.18] 30 [1.18] [23.23] [26.38] [28.62]... -
Page 18: Technical Data Hc75, Ihc018, Chc018, Ihc075
Technical data HC75, IHC018, CHC018, IHC075 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Steam connection Heating Packing dimensions Weight METRIC 1:11 6,9 kg 1:10 7,6 kg 8,4 kg Diameter 530 mm... -
Page 19: Dimensions Hc75, Ihc018, Chc018, Ihc075
Dimensions HC75, IHC018, CHC018, IHC075 Legend: metric mm [inches] 33 [1.3] 65 [2.56] 530 [20.87] 660 [25.98] 226 [8.9] 151 [5.94] 75 [2.95] 660 [25.98] 33 [1.3] 65 [2.56] 69 [2.72] 109 [4.3] 180 [7.09] 220 [8.66] 30 [1.18] 30 [1.18] [23.23] [26.38] [28.62]... -
Page 20: Technical Data Hc100, Ihc025, Chc025, Ihc100
Technical data HC100, IHC025, CHC025, IHC100 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Steam connection Heating Packing dimensions Weight METRIC 1:11 8,6 kg 1:10 9,5 kg... -
Page 21: Dimensions Hc100, Ihc025, Chc025, Ihc100
Dimensions HC100, IHC025, CHC025, IHC100 Legend: metric mm [inches] 33 [1.3] 65 [2.56] 530 [20.87] 660 [25.98] 226 [8.9] 151 [5.94] 75 [2.95] 660 [25.98] 33 [1.3] 65 [2.56] 69 [2.72] 109 [4.3] 180 [7.09] 220 [8.66] 30 [1.18] 30 [1.18] 690 [27.16]... -
Page 22: Technical Data Hc135, Ihc030, Ihc135
Technical data HC135, IHC030, IHC135 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Steam connection Heating Packing dimensions Weight METRIC 1:11 12 kg 1:10 13,2 kg 14,5 kg Diameter 650 mm Depth... -
Page 23: Dimensions Hc135, Ihc030, Ihc135
Dimensions HC135, IHC030, IHC135 Legend: metric mm [inches] 34 [1.34] 66 [2.6] 648 [25.51] 780 [30.71] 332 [13.05] 267 [10.49] 202 [7.93] 105 [4.13] 35 [1.38] 88 [3.47] 36.5 [1.44] 34 [1.34] 66 [2.6] 82 [3.23] 109.2 [4.3] 200 [7.87] 220 [8.66] 665 [26.18] 760 [29.92]... -
Page 24: Technical Data Hc165, Ihc035, Chc035, Ihc165
Technical data HC165, IHC035, CHC035, IHC165 Capacity (dry weight) Ratio [kg/Lit] Cylinder Cabinet Front loading Speed G-factor Dynamic bottom load (N/Hz) Motor (3-phase) Drain valve Water supply Steam connection Heating Packing dimensions Weight METRIC 1:11 15 kg 1:10 16,5 kg 18,3 kg Diameter 650 mm... -
Page 25: Dimensions Hc165, Ihc035, Chc035, Ihc165
Dimensions HC165, IHC035, CHC035, IHC165 Legend: metric mm [inches] 34 [1.34] 66 [2.6] 648 [25.51] 780 [30.71] 332 [13.05] 267 [10.49] 202 [7.93] 105 [4.13] 35 [1.38] 88 [3.47] 36.5 [1.44] 34 [1.34] 66 [2.6] 82 [3.23] 109.2 [4.3] 200 [7.87] 220 [8.66] 765 [30.12] 860 [33.86]... -
Page 26: Installation And Connection Instructions
Installation and Connection Instructions Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked. Label 1 Out of balance switch Window Probe... -
Page 27: Removal Of The Transport Safety
Removal of the transport safety To prevent damage during transportation, the machine has been equipped with two red transport brackets (A) to eliminate every possible movement of the tub. (See Label 3) After the machine has been placed level, take off the back panel and remove these transport brackets. -
Page 28: Mounting Bolt Hole Locations For Machines, Hc60, Ihc012, Ihc060
Mounting Bolt Hole Locations for machines, HC60, IHC012, IHC060 Legend: metric mm [inches] 65 [2.56] 530 [20.87] 660 [25.98] 65 [2.56]... -
Page 29: Mounting Bolt Hole Locations For Machines, Hc65, Ihc014, Ihc065
Mounting Bolt Hole Locations for machines, HC65, IHC014, IHC065 Legend: metric mm [inches] 65 [2.56] 530 [20.87] 660 [25.98] 65 [2.56]... -
Page 30: Mounting Bolt Hole Locations For Machines, Hc75, Ihc018, Chc018, Ihc075
Mounting Bolt Hole Locations for machines, HC75, IHC018, CHC018, IHC075 Legend: metric mm [inches] 65 [2.56] 530 [20.87] 660 [25.98] 65 [2.56]... -
Page 31: Mounting Bolt Hole Locations For Machines, Hc100, Ihc025, Chc025, Ihc100
Mounting Bolt Hole Locations for machines, HC100, IHC025, CHC025, IHC100 Legend: metric mm [inches] 65 [2.56] 530 [20.87] 660 [25.98] 65 [2.56]... -
Page 32: Mounting Bolt Hole Locations For Machines, Hc135, Ihc030, Ihc135
Mounting Bolt Hole Locations for machines, HC135, IHC030, IHC135 Legend: metric mm [inches] 66 [2.58] 648 [25.51] 66 [2.62] 780 [30.71]... -
Page 33: Mounting Bolt Hole Locations For Machines, Hc165, Ihc035, Chc035, Ihc165
Mounting Bolt Hole Locations for machines, HC165, IHC035, CHC035, IHC165 Legend: metric mm [inches] 66 [2.58] 648 [25.51] 780 [30.71] 66 [2.62]... -
Page 34: Water Connection
MODEL For the HC60, IHC012, IHC060 For the HC65, IHC014, IHC065 For the HC75, IHC018, CHC018, IHC075 For the HC100, IHC025, CHC025, IHC100 For the HC135, IHC030, IHC135 For the HC165, IHC035, CHC035, IHC165 Table 1 of machines. It should be sufficient to handle at least 80 l/min - 21.13 gal./min per machine. -
Page 35: Electrical Installation
This prevents damage to the motor by disconnecting all legs if one should be lost accidentally. Check the data plate on the back of the washer-extractor or consult Table 2 through 7 for circuit breaker requirements. - Page 36 This appliance must be connected to a grounded metal, permanent wiring system; or an equipment- grounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance. IMPORTANT: Alliance Laundry Systems Warranty does not cover components that fail as a result of improper input voltage.
-
Page 37: Main Power Connection
Main power connection Connection label: Machine power connections are made at the back of the machine. Three or four conductor power cable is the recommended method (See chapter electrical specs for minimum cable requirements, if local electrical codes exceed these requirements, follow local codes). The number of conductors in this cable and the proper connection points for the cable wires shall be determined by the machine and power requirements. - Page 38 200-240 Volts, 3-Phase, 3-wire + PE, 50 or 60 Hertz Configuration (Named: Q-Voltage or 3-phase X-Voltage): With supply power of: 200-240 Volts, 3-phase, 3-wire, after connecting the green/yellow PE ground wire, connect one power wire to each of the terminals at the bottom of the power contactor switch marked: “L1,L2,L3”. 200-240 volts, 1-Phase, 2-wire + PE, 50 Hertz (called 1-phase, 50 Hz X-voltage): With supply power of: 200-240 Volts, 1-phase, 2-wire, 50Hz, after connecting the green/yellow PE ground wire, connect the power wire to the “L1”...
-
Page 39: Electrical Specifications Hc60, Ihc012, Ihc060
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC60, IHC012, IHC060 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60... -
Page 40: Electrical Specifications Hc65, Ihc014, Ihc065
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC65, IHC014, IHC065 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60... -
Page 41: Electrical Specifications Hc75, Ihc018, Chc018, Ihc075
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC75, IHC018, CHC018, IHC075 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480... -
Page 42: Electrical Specifications Hc100, Ihc025, Chc025, Ihc100
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC100, IHC025, CHC025, IHC100 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480... -
Page 43: Electrical Specifications Hc135, Ihc030, Ihc135
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC135, IHC030, IHC135 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60... -
Page 44: Electrical Specifications Hc165, Ihc035, Chc035, Ihc165
The washer-extractor should be connected to an individual branch circuit not shared with lighting or other equipment. Electrical Specifications HC165, IHC035, CHC035, IHC165 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 200-240 50/60 440-480... -
Page 45: Liquid Soap Connection (Option)
Liquid soap connection (option) Label 5 Connection of the liquid soap hoses The liquid soap connection consists of 8 connections for liquid soap (See Label 5). The central opening is used for ventilation. Dangerous Chemicals. May damage eyes and skin. Wear eye and hand protection when handling chemicals;... - Page 46 The 220V can be transformed to other values to drive other type soap pumps. Example: pumps 24V ~. (See Label 7) Label 7 Also, pumps with different operating tension can be combined. Example: 5 pumps 220V ~ and 1 pump 24V ~. (See Label 8) Label 8 With an external tension 24V DC (See Label 9) Label 9...
-
Page 47: Connection Of A Central Operating Panel For Coin Machines (Option)
Connection of a central operating panel for coin machines (option) Label 10 Label 13 To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. -
Page 48: Steam Connection
Steam connection For the HC60, IHC012, IHC060 For the HC65, IHC014, IHC065 For the HC75, IHC018, CHC018, IHC075 For the HC100, IHC025, CHC025, IHC100 For the HC135, IHC030, IHC135 For the HC165, IHC035, CHC035, IHC165 WARNING Never touch internal or external steam pipes, connections, or components. -
Page 49: Technical Remarks
Technical remarks Internal connections of the electrical heating 1 AC 3 AC B = Black Br = Brown Gy = Grey Bu = Blue R = Red W = White Heating LC1D0901 4,2 / 6 / 9kw LC1D1810 Table 9 Heating 3x230V 4,2kw... -
Page 50: Maintenance Instruction Of The Machine
Maintenance instruction of the machine To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply. Before starting wiring or inspection, power must be switched OFF, check to make sure that the operation panel indicator is off. -
Page 51: Annual Maintenance
Model Belt HC60 8PJ 1355 HC65 8PJ 1355 HC75 8PJ 1355 HC100 8PJ 1355 HC135 10J 1473 HC165 10J 1473 Important - Clean the drainpipe every 6 months in case drain (B) is used. - The water still being in the drain needs to be drained using drain (A) before cleaning the drainpipe or replacing the exhaust valve. -
Page 52: Contact Information
Contact Information Nameplate Nameplate Location The nameplate is located at the rear of the machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. See Labels 16 and 17. Label 16 Label 17... - Page 53 Position of the Serial plate Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact the phone numbers or websites shown on the nameplate.
-
Page 54: Repair And After-Sales Service
Program: ... Date of installation: ... Installed by: ... Serial number: ... Operation voltage and frequency: ... Alliance Laundry Systems Shephard Street, PO BOX 990 Ripon, WI 54971-0990 United States Tel: 001 920 748 3121 - Fax: 001 920 748 1645 www.comlaundry.com...
Need help?
Do you have a question about the HC100 and is the answer not in the manual?
Questions and answers