Alliance Laundry Systems CHM166C Installation/Operation Supplement
Alliance Laundry Systems CHM166C Installation/Operation Supplement

Alliance Laundry Systems CHM166C Installation/Operation Supplement

Cabinet hardmount

Advertisement

Quick Links

Washer-Extractors
Cabinet Hardmount Operating Instructions
This manual is only a
Supplement. Refer to
Installation Manual and
Operation/Maintenance
Manual for full
instructions.
CHM166C
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F232145R6EN
www.comlaundry.com
November 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHM166C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alliance Laundry Systems CHM166C

  • Page 1 Cabinet Hardmount Operating Instructions This manual is only a Supplement. Refer to Installation Manual and Operation/Maintenance Manual for full instructions. CHM166C Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F232145R6EN www.comlaundry.com November 2005...
  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Important Safety Instructions ...
  • Page 4 Installation/Operation Supplement Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232145 (EN)
  • Page 5: Important Safety Instructions

    F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information Important Safety Instructions To reduce the risk of fire, electric shock,...
  • Page 6 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19. Replace worn power cords and/or loose plugs. 20. Be sure water connections have a shut-off valve and that fill hose connections are tight.
  • Page 7: Specifications And Dimensions

    (mm) Cylinder depth, in. (mm) Cylinder volume, ft Perforation size, in. (mm) Perforation open area, % F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 2 Speed Models 18, 20 27, 30 (660) (660)
  • Page 8 Wash/reverse speed, RPM High extract speed, RPM Centrifugal Force Data Wash/reverse centrifugal force, Gs High extract centrifugal force, Gs © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1 (Continued) 2 Speed Models (Continued) 18, 20 27, 30...
  • Page 9 Electrical Heating (Optional) Total electrical heating capacity, Electrical heating elements Electrical heat element size, kW F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1 (Continued) 2 Speed Models (Continued) 18, 20 27, 30...
  • Page 10: Gap Setting For Vibration Switch (Variable-Speed And Fixed-Speed Models)

    NOTE: The standard position of the switch is open, or non-tripped. 3. Tighten nuts on switch extension after adjusting the gap. Measure the gap distance to verify accurate setting. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 0.030- 0.020- 0.025- 0.040 in.
  • Page 11 Height of door bottom above floor, in. (mm) Power Consumption Average power used per cycle, kW-hr Average HVAC load, Btu/hr F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Variable-Speed and Fixed-Speed Models 30-1/8 30-5/8 (660)
  • Page 12 Electrical heating elements Electrical heat element size, kW * Refer to Gap Setting for Vibration Switch (Variable-Speed and Fixed-Speed Models) section for specifications. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 3 (Continued) (1.5) (1.5) (1.5)
  • Page 13 For 18, 20, 25, 27, 30 and 35 Pound Capacity Machines Sump Gap Distance F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 1 Installation/Operation Supplement CHM1995N Vibration Switch Switch Extension CHM1995N...
  • Page 14 Installation/Operation Supplement For 40 and 50 Pound Capacity Variable-Speed and Fixed-Speed Machines Sump Gap Distance © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Vibration Switch Switch Extension Figure 2 CHM2000N F232145 (EN)
  • Page 15 For 60 Pound Capacity Variable-Speed and Fixed-Speed Machines Lower Bracket Upper Bracket Vibration Switch F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation/Operation Supplement Balance Bolt Lock Nut Gap Distance Figure 3 CHM1999N CHM1999N...
  • Page 16 Installation/Operation Supplement For 80 Pound Capacity Machines Switch Extension Gap Distance © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Vibration Switch Figure 4 CAB1998N CHM1998N F232145 (EN)
  • Page 17 For 125 Pound Capacity Machines Vibration Switch Gap Distance F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation/Operation Supplement Switch Extension Figure 5 CHM1993N...
  • Page 18: Dimensional Clearances

    12 in. (305 mm) (305 mm) *For 80 pound models intended for standard mounting, clearance should be 6 in. (150 mm). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT FRONT Figure 6 Machine Capacity Dimensional Clearances 27, 30 2 in.
  • Page 19: And 80 Models

    Input Power Block External Chemical Supply Signal Terminal Strip (OPL only) Cold Water Inlet F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Hot Water Inlet Extra Inlet Valve External Chemical Supply Inlet (OPL only) Vacuum Breaker...
  • Page 20 1-3/16 in. (30 mm) (30 mm) 3 in. 3 in. (76 mm) (76 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Machine Capacity Dimensions 27, 30 24 in. 26 in. 25-3/4 in. (610 mm) (660 mm) (654 mm) 17 in.
  • Page 21: 125 Model

    1422 mm (56.75 in.) 25 mm (1 in.) 1791 mm (70.5 in.) 1130 mm (44.5 in.) F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Liquid Chemical Inlet Steam Inlet (Optional) Drain Outlet Figure 8...
  • Page 22: Electrical Specifications

    208 – 240 200 – 240 50/60 NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications 18 and 20 Pound Capacity Models Standard...
  • Page 23 1 or 3 2 or 3 NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310. F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications 35 Pound Capacity Models...
  • Page 24 1 or 3 2 or 3 6.3/6.3 NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310. *Coin models only. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications 50 Pound Capacity Models...
  • Page 25 200-240 50/60 NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310. F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications 60 Pound Capacity Models Standard 2 Speed Models...
  • Page 26 50/60 200 – 240 50/60 NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications 80 Pound Capacity Models Standard Variable-Speed Models 12.4...
  • Page 27: Operation

    CHM500N CHM500N CHM501N CHM501N CHM502N CHM502N CHM503N CHM503N Table 15 (Continued) F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation Description Start Special Wash Normal Cycle Delicate Cycle Cold Wash Warm Wash Hot Wash...
  • Page 28 CHM1987N CHM1987N CHM1988N CHM1988N Wash Temperature Display CHM1989N CHM1989N Vend Price/Actuation CHM1990N CHM1990N © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Description Normal Wash Permanent Press Normal Wash Warm Permanent Press Warm Normal Wash Cold Cold...
  • Page 29: Instructions For Edc Control

    3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 10. Figure 10 F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation/Operation Supplement 4. Close door and turn handle counterclockwise until button pops out. Refer to Figure 11.
  • Page 30 Bleach Softener Figure 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NOTE: If a higher-priced cycle is selected, after the full price has been satisfied for current cycle, display will show additional price required and the INSERT COIN/CARD light will flash.
  • Page 31: Instructions For Mechanical Timer

    Figure 17. DOOR UNLOCK Figure 17 F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 18. 4. Close door and turn handle counterclockwise until button pops out.
  • Page 32 7. For coin models: Insert required number of coins to start machine. Refer to Figure 21. Detergent Bleach Softener Figure 21 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT For non-coin models: Press the Start button. Refer to Figure 22. WARM WARM COLD...
  • Page 33: Instructions For S, P And V Series Microcomputers

    Figure 25. DOOR UNLOCK Figure 25 F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 26. 4. Close door and turn handle counterclockwise until button pops out.
  • Page 34 Start Stop Figure 29 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9. When applicable, add beach to container 2 when the display reads “bLCH”. Refer to Figure 30. NOTE: To stop a cycle at any time, press the Stop key.
  • Page 35: Instructions For B Series Microcomputer

    3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 32. Figure 32 F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation/Operation Supplement 4. Close door and turn handle counterclockwise until button pops out. Refer to Figure 33.
  • Page 36 As each coin is added, the display counts down to the amount remaining. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9. If the machine is a card operated unit, insert and remove card. Contact the card reader manufacturer for details.
  • Page 37: Instructions For A Series Microcomputer

    3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 37. Figure 37 F232145 (EN) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation/Operation Supplement 4. Close door and turn handle counterclockwise until button pops out. Refer to Figure 38.
  • Page 38 9. If the machine is a card operated unit, insert and remove card per card system instructions. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10. If the unit is interfaced to a central/remote pay system, go to the central/remote pay console, make payment, select the machine, and follow central/remote pay system instructions.

Table of Contents

Save PDF