Set A Waypoint By Projecting A Position - Eagle FishElite 480 Installation And Operation Instructions Manual

4. The Edit Waypoint menu appears. You can simply save the waypoint
by pressing
EXIT

Set a Waypoint by Projecting a Position

This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the Points of In-
terest list.
1. Press |→ to
WPT
2. Press ↓ to
P
3. Press → to
map feature or Point of Interest. When the point has been selected,
press and the point's position appears as the reference position.
ENT
4. Press ↓ to
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT
5. Press ↓ to
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT
6. Press ↑ to
can simply save the new projected waypoint by pressing
you can edit the waypoint. (Press
begin navigating to the new waypoint.)
| or you can edit the waypoint.
EXIT
S
UBCATEGORY
P
ROJECTED OSITION
C R
HOOSE EFERENCE
. Press ↑ or ↓ to change the first character,
|
D ENT
ISTANCE
.
. Press ↑ or ↓ to change the first character,
|
B ENT
EARING
.
|
P ENT
ROJECTION
column|↓ to
| |→ to
ENT C
. Use ↑ and ↓ to select a waypoint,
|
ENT
. The Edit Waypoint menu appears. You
|
EXIT ENT
135
| .
N ENT
EW
| .
ENT
REATE
if you want to immediately
| or
EXIT EXIT