Options List for customizing Digital Data boxes. At left, the list first
appears with Water Speed selected. At right, Maximum Speed has been
picked to replace Water Speed in the top digital data box.
Tip:
You can customize other digital data boxes before returning to the
Sonar Page. After changing the first box by selecting the Data Type
and pressing Enter, use the ↓ key to select another box to change.
When the selected box title bar flashes, press
data type|
then press
Map With Sonar Split Screen
There is a page mode that splits the screen in half, with the map on the
left and the sonar on the right. This screen option can be found on the
Pages Menu under the Map Page category.
Map With Sonar split screen option. At far right, the full Map Page is
shown. The Pages Menu with the Map option list is shown in the
center. At right, the Map With Sonar split screen is shown.
When this screen is activated, you need to specify which side the Menu,
Zoom In and Zoom Out keys correspond to. To do this, press
. Repeat these steps until you're finished customizing,
ENT
to return to the Sonar Page.
EXIT
83
|↑ or ↓ to select
ENT