Depth Range - Manual; Turn Auto Depth Range On Again; Fastrack - Eagle FishElite 480 Installation And Operation Instructions Manual

At left, Sonar Page menu with Depth Range command selected. At
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A black bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the man-
ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
|↓ to
MENU A
UTO
2. Press ↑ to
pears.
3. Press ↓ or ↑ to select a different depth range. A horizontal black bar
highlights the selected range.
4. When the new range is selected, press
To turn Auto Depth Range on again:
From the Sonar Page, press
NOTE:
The sonar's depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen con-
tinues to operate normally. FasTrack gives you a rapid update of condi-
tions directly under the boat. This makes it useful for ice fishing, or
when you're fishing at anchor. When the boat is not moving, fish sig-
nals are long, drawn out lines on a normal chart display. FasTrack con-
verts the graph to a vertical bar graph that, with practice, makes a use-
ful addition to fishing at a stationary location.
right, the Depth Range Control Scale.
D R
EPTH ANGE
|
D R ENT
EPTH ANGE
EXIT
| .
ENT
and the Depth Range Control Scale ap-
EXIT
|↓ to
MENU A
UTO
63
to clear the menu.
to clear the menu.
|
D R ENT
EPTH ANGE
| .
EXIT