Table of Contents
Advertisement
Fill the glue container with glue so it is even and level and does not go over the limit
mark.
#
•
Do not allow glue to get into the binder's mechanical parts through the gaps
in the binder. If glue gets into the binder's mechanical parts it could cause a
malfunction.
•
Do not put anything other than glue into the glue container. If something
other than glue gets into the glue container it could cause a fire or a malfunc-
tion.
•
Do not add so much glue that it goes over the limit mark. Doing so may
prevent the glue container from closing or cause glue to spill inside the me-
chanical parts of the binder.
•
When the glue is filled up, it may be difficult to open the glue container. If
this happens, open the glue container slowly again and again. Opening it too
hard might cause a malfunction.
#
IMPORTANT
•
Use the supplied scoop to replenish the glue. Do not use the supplied scoop except
for replenishing the glue. Also store the scoop in a safe place for future use.
•
Do not use glue that has fallen on the floor because it might have dust or dirt in
it.
Close the glue container's lid and its inner lid and close the glue container by pressing
3.
until you hear it click into place.
CAUTION
Chapter 3 - Basic operations
Replenish glue
55
Advertisement
Table of Contents
