Table of Contents
Advertisement
Load paper into the sheet inserter
Introduction
Paper loaded into the sheet inserter can be supplied as covers or slip sheets. The sheet
inserter is able to use paper that cannot be supplied from the printer or side paper deck
(color copied paper, etc.) as cover paper and slip sheets.
#
IMPORTANT
•
Be sure to fan paper before loading it.
•
If paper is curled (particular color copied paper), be sure to remove the curl before
using the paper.
•
Do not use the following types of paper.
- Paper that is torn or has holes or other openings in it.
- Badly curled or creased paper.
- Paper that is clipped, stapled, etc.
- Paper that has correcting fluid, paper, tape, etc. on it.
#
NOTE
Note that the left-right orientation of paper loaded in the sheet inserter differs as
shown below.
#
- Leftward orientation
<Top>
<Bottom>
- Rightward orientation
<Bottom>
<Top>
Purpose
This section explains how to load paper into the upper and lower trays of the sheet inserter.
<Foredge>
Inserter feed direction
<Foredge>
Inserter feed direction
Load paper into the sheet inserter
Chapter 3 - Basic operations
45
Advertisement
Table of Contents
