Load paper into the sheet inserter
•
Loading paper into the lower tray.
- The following paper sizes can be loaded.
Width (side to side): 257.0 to 330.2 mm
Length (in direction of transfer): 182.0 to 487.7 mm
- Load the paper with the surface that will be the cover facing up and with the sheets
aligned against the back of the tray. Make sure that the back edge of the loaded paper
aligns with the indicator on the tray. (The following illustration shows the paper
loaded for leftward orientation.)
#
NOTE
•
You can load paper to be used as covers or slip sheets in the lower tray.
•
A part of the upper tray can be raised when small sheets of paper are loaded.
On the printer display, select the size and type of the paper loaded in the sheet inserter.
3.
#
IMPORTANT
•
Select the same size and type as the paper loaded in the sheet inserter.
48
Chapter 3 - Basic operations