Periodic test of the breaker
How to check the breaker
Introduction
A breaker that detects over current and short circuits is equipped in order to prevent
electric shock on the product.
Be sure to perform the following procedure once or twice a month to periodically test
the breaker.
#
IMPORTANT
•
Periodic testing of the breaker should be performed with the binder's power switch
turned on. Turn off the power to the printer so that the binder does not operate
during the test.
•
If a breaker test reveals that it is not operating normally, contact your local autho-
rized dealer.
How to check the breaker
Use a ballpoint pen or some other thin, pointed object to press the breaker test button
1.
on the back of the unit.
#
IMPORTANT
Do not keep the test button depressed. Press and immediately release it.
#
NOTE
The breaker is located on the back of the unit.
How to check the breaker
Chapter 1 - Introduction
21