Table of Contents
Advertisement
Remove the booklets from the stacker.
2.
#
Do not move the stacker's guide with your hand. Moving the guide may cause
a malfunction.
#
IMPORTANT
Be sure to remove all the booklets when the stacker is open. The stacker is recognized
as full if any booklets are left in it.
Close the stacker.
3.
Close it until it clicks into place.
#
Be careful not to pinch your fingers in the gaps when the stacker is closing.
#
NOTE
If you open the stacker while the binder is operating, quickly remove the booklets
and close the stacker. If the stacker is open, binding operations, except transferring
paper to the gathering tray and gluing, stop. If this happens, remove all booklets from
the stacker and then close it to restart binding operations.
CAUTION
CAUTION
Chapter 3 - Basic operations
Remove finished booklets
51
Advertisement
Table of Contents
