Table of Contents
Advertisement
Remove the trimmer waste tray and discard the cuttings.
2.
Place back the trimmer waste tray and close the trimmer waste unit.
3.
Close the trimmer waste unit by pressing until it clicks into place.
#
NOTE
If you open the trimmer waste unit while the binder is operating, quickly remove the
cuttings and close the trimmer waste unit. If the cuttings for a single booklet cannot
be discharged to the trimmer waste unit, binding operations stop until it can be dis-
charged to the trimmer waste unit. If this happens, remove the cuttings from the
trimmer waste unit and then close it to restart binding operations.
Discard cuttings
Chapter 3 - Basic operations
53
Advertisement
Table of Contents
