Table of Contents
Advertisement
Clean the binder
Introduction
Clean the outside of the machine if it gets dirty after using it for a long period of time.
Please note the following points to prevent malfunctions or electric shock when cleaning
the machine.
#
•
Turn off the power switch and unplug the power plug (see
main power off' on page
•
Never plug in or unplug the power plug while your hands are wet. Doing so
creates the risk of electric shock.
•
Do not use alcohol, benzene, paint thinner, or other flammable substances.
The volatile or flammable materials could come in contact with the machine's
electronic components and cause a fire or a short circuit.
#
IMPORTANT
•
Do not use any cleanser other than water or a neutral cleanser diluted with water.
Doing so may cause the machine's plastic parts to deteriorate or crack.
•
Be sure to dilute any neutral cleanser with water.
•
The machine does not need to be lubricated. Do not lubricate the machine.
Clean the binder
Open the power switch cover and press the OFF side of the power switch to turn off the
1.
power before removing the power plug.
Dampen a soft cloth in water or neutral cleanser that has been diluted with water and
2.
thoroughly wring it out before wiping any dirt from the machine.
After cleaning the machine with a neutral cleanser, be sure to wipe off the neutral cleanser
with a cloth that has been dampened with water.
After cleaning the machine, use a soft dry cloth to dry it.
3.
Plug the power plug into to power outlet and press the ON side of the power switch and
4.
then close the power switch cover.
WARNING
34). It may result in a fire or electric shock.
Clean the binder
'How to turn the
Chapter 3 - Basic operations
57
Advertisement
Table of Contents
