•
Protected images on a memory card will be erased if you format
the card (= 2 67, 268).
•
Protected images cannot be erased using the camera's erasure function. To
erase them this way, first cancel protection.
Choosing Images Individually
•
Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
•
You can also select or clear images by touching the screen in step 2, and
you can access the confirmation screen by touching [
•
You can also protect images by touching [OK] on the screen in step 3.
1
Choose [Select].
z
z
Following step 2 on = 2 36, choose
[Select] and press the <m> button.
2
Choose an image.
z
z
Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button. [
z
z
To cancel selection, press the <m>
button again. [
z
z
Repeat this process to specify other
images.
3
Protect the image.
z
z
Press the <n> button. A
confirmation message is displayed.
z
z
Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Protecting Images
] is displayed.
] is no longer displayed.
].
237