Canon PowerShot S110 User Manual page 55

•
To add multiple cameras, repeat the above procedures starting from step 1.
• Once a camera is added, the camera name will be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera name
from the list.
• You can also configure this setting through touch-screen operations
(= 9 1).
• When a connection destination is set using the Touch Actions setting
(= 2 48), you can automatically access the function to connect to the last
connected destination from the next time by just dragging on the screen
without needing to perform the connection operation.
3
Choose [Add a Device].
z z Press the <o><p> buttons or turn the
<7> dial to choose [Add a Device], and
then press the <m> button.
z z Follow steps 1 – 3 on the target camera.
X X Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
X X When the target camera has been added
successfully, the image transfer screen
will be displayed (= 7 5).
Connecting to Another Camera
55