•
For some images, correction may be inaccurate or may cause
images to appear grainy.
•
Images may look grainy after repeated editing using this function.
•
RAW images cannot be edited this way.
•
If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
•
You can also configure this setting by touching [q][r] on the screen in step
3.
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1
Choose [Red-Eye Correction].
z
z
Press the <n> button, and then
choose [Red-Eye Correction] on the [ 1 ]
tab (= 9 1).
2
Choose an image.
z
z
Press the <q><r> buttons or turn the
<7> dial to choose an image.
3
Correct the image.
z
z
Press the <m> button.
Red-eye detected by the camera is now
X
X
corrected, and frames are displayed
around corrected image areas.
z
z
Enlarge or reduce images as needed.
Follow the steps in = 2 33.
Editing Still Images
Still Images
255