Choosing Images Individually; Selecting A Range - Canon PowerShot G1 X Mark III Camera User Manual

Choosing Images Individually

1
Choose [Select].
Following the procedure in "Using the
z
Menu" ( = 121), choose [Select] and
press the [
2
Choose an image.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image, and then press
the [ ] button. [
To cancel selection, press the [
z
again. [ ] is no longer displayed.
Repeat this process to specify other
z
images.
3
Protect the image.
Press the [
z
message is displayed.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
● You can also select or clear images by touching the screen in
step 2, and you can access the confirmation screen by touching
[ ].
● You can also protect images by touching [OK] on the screen in
step 3.
] button.
] is displayed.
] button
] button. A confirmation

Selecting a Range

1
Choose [Select Range].
Following the procedure in "Using the
z
Menu" ( = 121), choose [Select Range]
and press the [
2
Choose a starting image.
Press the [
z
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image, and then press
the [ ] button.
3
Choose an ending image.
Press the [ ] button to choose [Last
z
image], and then press the [
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image, and then press
the [ ] button.
Images before the first image cannot be
z
selected as the last image.
Before Use
Basic Guide
Advanced Guide
] button.
] button.
] button.
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
122