Connecting to a Computer
Configure camera settings for a wireless computer connection, and then
transfer images to the computer wirelessly using the included software
CameraWindow as follows.
•
When connected to a computer, the camera is used to establish the
connection and then the computer (included software CameraWindow) is
used to transfer images.
•
For details on the included software, see the Software Guide.
Preparing to Register a Computer
Prepare to register a computer.
Checking the Computer and Wireless LAN Setup
The camera can connect to the following computers via wireless LAN.
Windows
•
Windows 7 Service Pack 1
Macintosh
•
Mac OS X 10.6.8 or later
•
Windows 7 Starter and Home Basic editions are not supported.
•
Windows 7 N (European version) and KN (South Korean version)
require a separate download and install of Windows Media
Feature Pack.
For further details, see the following websites.
http://go.microsoft.com/fwlink/?LinkId=159730
To use wireless LAN, an access point base unit (wireless LAN router, etc.)
connected to a computer is required.
Additionally, the included software, CameraWindow must be installed.
56