Canon PowerShot S110 User Manual page 158

Special Modes for Other Purposes
• Even if your face is not detected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 1 31) is only available for the final shot.
• You can also choose the shooting mode by choosing [
= 1 37, touching [
touching the same item or [
High-Speed Continuous Shooting (High-speed
Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
"Specifications" (= 3 33).
HQ: High Quality
•
Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even
longer.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
158
] to access the setting screen, touching [
].
1
Choose [ ].
z z
Follow steps 1 – 2 on = 1 37 and
choose [
2
Shoot.
Hold the shutter button all the way down
X X
to shoot continuously.
z z Shooting stops when you release the
shutter button or reach the maximum
number of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
] in steps 1 – 2 on
].
], and then
Still Images