Canon PowerShot S110 User Manual page 226

Browsing and Filtering Images
•
When the camera has found no corresponding images for some
conditions, those conditions will not be available.
226
2
Choose the first condition for
image display or navigation.
z z Press the <o><p> buttons to choose a
display filter.
z z When [ ] is selected, you can view
only images matching this condition by
pressing the <q><r> buttons. To perform
an action for all of these images together,
press the <m> button and go to step 4.
3
Choose the second condition
and check the images found.
z z Press the <q><r> buttons to choose
another condition. Once you turn the
<7> dial, you can view the images
narrowed down by your conditions.
z z To cancel this mode, press the <n>
button.
z z To switch to filtered image display, press
the <m> button and go to step 4.
4
View the filtered images.
z z Images matching your conditions are
displayed in yellow frames. To view
only these images, press the <q><r>
buttons, or turn the <7> dial.
z z
To exit filtered image display, press the
<o> button, and after [Image search
canceled] is displayed, press the <m>
button.