Setting A Later End Time; Setting The Clock - Bosch HBM56B551B Instruction Manual

Press the 0 button. The time-setting options menu closes.
4.
If operation has not yet been started
Press the n button.
5.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The main oven stops heating. The cooking
time is at ‹‹ : ‹‹ . You can cancel the signal earlier by pressing
the 0 button.
Cancelling the cooking time
Press the button to open the menu. Using the
0
switch to the [ r ] cooking time and use the rotary selector to
set the cooking time to ‹‹
the menu.
Changing the cooking time
Press the 0 button to open the menu. Using the
move to the [ r ] cooking time and set the cooking time using
the rotary selector. Press the

Setting a later end time

You can delay the end time for the
possible for
all types of heating
■
a variety of programmes
■
the cleaning system
■
Example: You put the dish in the main oven at 9 :30. It takes
45 minutes to cook and will be ready at 10:15 However, you
would like it to be ready at 12:45 instead. Change the end time
from 10 :15 to 12 :45 . The operation starts at 12:00 and ends
at 12:45.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Prerequisite: A cooking time is set. Operation has not yet been
started. The 0 time-setting options menu is open.
Switch to the [ ] end time using the
p
1.
Use the rotary selector to set a later end time.
2.
Press the button to close the time-setting options menu.
0
3.
X
: ‹‹ . Press the 0 button to close
X
button to close the menu.
0
main oven. This is
ó
button.
X
Confirm by pressing the
4.
The main oven is on standby. The [
the clock display. As soon as operation starts, you will see
the cooking time counting down.
The cooking time has elapsed
A signal sounds. The main oven stops heating. The cooking
time is at ‹‹
the 0 button.
Correcting the end time
This is only possible as long as the oven is in [
Press the 0
using the X
selector. Press the
Cancelling the end time
This is possible, providing the oven is on standby. Select the
menu with the
the button. Turn the rotary selector anti-clockwise until the
X
current end time is reached. The cooking time immediately
button,
starts to count down.

Setting the clock

The oven must be switched off before you can set or change
the clock.
button,
Following a power cut
After a power cut [
the current time.
Press the
1.
The selected function [
display.
Turn the rotary selector to set the current time.
2.
Confirm by pressing the
3.
The time appears in the display.
Changing the clock
If you wish to change the clock from summer to winter time, for
example:
Press the
1.
The time-setting options menu appears.
Move to the clock [
2.
Turn the rotary selector to set the current time.
3.
Press the
4.
The time appears in the display.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.
n button.
p
: ‹‹ . You can cancel the signal earlier by pressing
button to open the menu. Move to the end time
button. Adjust the end time using the rotary
button to close the menu.
0
0 button and move to the end time using
] and : appears in the display. Set
0 ‹‹ ‹‹
button.
0
] and [ :
0 ‚ƒ ‹‹
button.
0
0 button.
0 ] using the X
button.
0
] end time is shown in
p ] standby.
] appear in the
button.
13