Setting Rapid Heating; Time-Setting Options; Setting The Time-Setting Options ­ In Brief; Setting The Timer - Bosch HBM56B551B Instruction Manual

Setting a later end time
See Setting a later end time in the Time­setting options section.

Setting rapid heating

You can set rapid heating for the
following types of heating:
= 3D hot air
<
■
= Top/bottom heating
%
■
= Pizza setting
6
■
A brief audible signal indicates that the type of heating selected
is not suitable for rapid heating.
Suitable temperatures
The rapid heating function will work only if the temperature
setting is above 100 °C. Rapid heating is not necessary if the
temperature in the cooking compartment is only slightly lower
than the temperature set. It will not switch on.

Time-setting options

The main oven has various time-setting options, which you
ó
can call up using the button. The following functions are
0
available:
If the oven is switched off:
= Sets the timer
U
■
= Sets the clock
0
■
If the oven is switched on:
U = Sets the timer
■
= Sets the cooking time
r
■
= Sets a later end time
p
■
The brackets around the symbol indicate that this function is
selected. After the appliance is started, the brackets indicate
which time-setting option is currently running in the display.
Setting the time-setting options ­ in brief
Press the 0 button to open the menu.
1.
Select the desired function with the
2.
Set the desired value with the rotary selector.
3.
Press the button to close the menu.
0
4.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.

Setting the timer

The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time, regardless of whether oven
is switched on or off.
Press the 0 button.
1.
The time-setting options menu appears. The [
brackets shows that the timer function is selected.
Set the running time for the timer using the rotary selector.
2.
Press the button to close the menu.
0
3.
The time counts down in the clock display.
12
ó main oven with the
button.
X
] symbol in
U
Setting rapid heating
Press the button to activate rapid heating. The
c
appears next to the selected temperature. The temperature
indicator bars start filling.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c
Cancelling rapid heating
Press the button. The symbol goes out.
c
Notes
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this counts down after the
■
appliance is started, regardless of whether rapid heating has
been set.
You can use the button to check the current heating
°
■
temperature during rapid heating.
To ensure an even cooking result, do not place your dish in
■
the cooking compartment until rapid heating is complete.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
: . Press the button. The display goes out.
‹‹ ‹‹ 0
Cancelling the timer time
Press the 0 button to open the time-setting options menu.
Using the rotary selector, turn the time back to
the 0 button to close the menu.
Changing the timer time
Press the 0 button to open the time-setting options menu. Use
the rotary selector to change the time within the next few
seconds. Press the 0 button to close the menu.

Setting the cooking time

You can set a cooking time for your dish in the
Operation is ended automatically after this time. The main oven
stops heating.
Prerequisite: A type of heating and temperature are set for the
main oven.
Example shown below: Setting for
180 °C, cooking time of 45 minutes.
Press the button. The time-setting options menu appears.
0
1.
The time-setting options are displayed in the left-hand side of
the display. The [ ] timer function is selected.
U
Switch to the [ ] cooking time using the
r
2.
Set the cooking time using the rotary selector.
3.
c
symbol goes out.
‹‹ : ‹‹
ó main oven.
Top/bottom heating,
%
button.
X
symbol
. Press