Table of Contents
Advertisement
4.
Use the arrow key to select the disk you would like to configure as hot spare,
then move the cursor to the Hot Spr column. Press <+>, <->, or <Space>.
Press <C> to commit the changes. The Drive Status column field now shows
Hot Spare.
LSI Corp Config Utility
Manage Hot Spare -- SAS2008
Identifier
Type
Size(GB)
Status
Task
Slot
Device Identifier
Num
0
ATA
1
ATA
2
ATA
3
ATA
Esc = Exit Menu
SPACE/+/- = Change Item
Running a consistency check
To run a consistency check on the RAID volume:
Follow steps 1–3 of the section Viewing volume properties and step 2 of
1.
the section Managing hot spares.
From the Manage Volume screen select Consistency Check, then press
2.
<Enter>.
3.
The below screen appears. Press <Enter> to start the consistency check on
the RAID volume.
LSI Corp Config Utility
Manage Volume -- SAS2008
Press Enter to run a consistency check on the RAID volume.
This field is grayed out under the following conditions:
- The adapter's MPT FW does not support the feature
- The volume is a RAID 0
- The volume is not optimal
- The volume is already running a consistency check
- The volume has a consistency check pending
Esc = Exit Menu
Enter = Select Item
ASUS PIKE 2008
v7.05.01.00 (2010.02.09)
LSI
RAID 1
73
Optimal
None
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
WDC WD800JD-22LS1D06
F1/Shift+1 = Help
v7.05.01.00 (2010.02.09)
F1/Shift+1 = Help
Logical Volume 3000
Hot
Drive
Pred
Spr
Status
Fail
[No]
RAID
No
[No]
RAID
No
[No]
----------
No
[No]
----------
No
C = Commit Changes
Size
(GB)
74
74
74
74
2-15
Advertisement
Table of Contents
