4.
Secure the heatsink to the nearest
screw hole on the motherboard.
DO NOT overtighten the screw,
or the motherboard component
can be damaged.
5.
Connect the hard disk drives
to the SAS connectors on the
motherboard.
To uninstall ASUS PIKE 2008 SAS RAID card from a 2U, 5U, or pedestal server
1.
Disconnect all SAS hard disk
drives from the motherboard.
2.
Remove the screw that secures the
RAID card to the motherboard.
3.
Release the heatsink latch from
the card slot with a finger, and then
remove the RAID card from the
slot.
ASUS PIKE 2008
1-5