Installing the Network Connector Jack
1.
Install the network connector jack in the computer.
2.
Thread the network connector cable in the routing channel.
3.
Install:
a) modem card
b) left support frame
c) right support frame
d) display assembly
e) palmrest
f) processor door
g) hard drive
h) optical drive
i)
keyboard
j)
keyboard trim
k) bottom door
l)
battery
m) SD memory card
4.
Follow the procedures in
Removing the Speakers
1.
Follow the procedures in
2.
Remove:
a) SD memory card
b) battery
c) bottom door
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) WLAN card
i)
processor door
After Working Inside Your Computer .
Before Working Inside Your Computer .
49