f) palmrest
g) thermal module
h) processor door
i)
WLAN card
j)
hard drive
k) optical drive
l)
keyboard
m) keyboard trim
n) bottom door
o) battery
p) SD memory card
4.
Follow the procedures in
Removing the Power Connector
1.
Follow the procedures in
2.
Remove:
a) SD memory card
b) battery
c) bottom door
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) WLAN card
i)
processor door
j)
thermal module
k) palmrest
l)
ExpressCard reader cage
m) display assembly
n) left support bracket
o) system board
3.
Remove the power connector cable from the routing channels.
After Working Inside Your Computer .
Before Working Inside Your Computer .
45