Using The Radio In Weather Mode; Weather Mode With Weather Alert Watch; Weather Mode With Triple And Dual Watch; Using Your Radio - Uniden UM435 Owner's Manual

Using the radio in weather mode

x You cannot transmit while in weather mode.
x To enter weather mode, press WX-MEM.
x Weather mode can filter out alerts that do not affect your location if the location code
(FIPS code) of the alert is entered in your radio (see page 13). If you have no FIPS
codes programmed into your radio, the radio will notify you of all alerts in any area.
x To turn off the radio's alert tone, press any button.
x To cancel weather mode and return to the previous marine channel, press the WX-MEM
button again.

Weather mode with Weather Alert Watch

Because weather mode already monitors the weather channels, you don't need Weather
Alert Watch to check the weather channel every seven seconds. If you activate Weather Alert
Watch while operating in weather mode, it operates as a type of "sleep mode:" the radio stays
on the weather channel and mutes the speaker. If an alert is detected for your area, the radio
sounds an alert tone and turns the speaker back on. This mode is very useful when you are
anchoring for the night but want to stay informed of any hazards in your area.
To turn Weather Alert Watch on or off, press and hold CALL-MENU while the radio is idle.
Select Setup and then WX-Alert Mode. Use CHANNEL UP and CHANNEL DOWN to choose WX
Alert Mode setting ON or OFF.
Weather mode with Triple or Dual Watch
If you activate Triple Watch while operating in weather mode, the radio checks channels 16
and 9 every two seconds; with Dual Watch turned on, the radio only checks channel 16.
Press and hold 16/9-TRI (on the radio or the microphone) for two seconds to turn Triple/
Dual Watch on or off. (To change between Triple or Dual Watch, see page 13.)

USING YOUR RADIO

To display the radio call menu, press CALL-MENU. To display the radio normal menu, press
and hold CALL-MENU. The menu has the following options:
10