Oki ML320 Quick Start

Overview

1 Physical Setup
Take the printer out of the box, set it up, and verify it operates
2 Local Printer Installation
Installing your printer as a local printer
3 Network Installation
Installing your printer as a network printer
4 Product Registration

Customizing the Installation

• Top of Form (TOF)
• Paper Path
• Printhead Gap
User's Guides

Quick Start

Top of Form (TOF)
!
If you turn the platen knob when the printer is turned on,
you will cause the Top of Form to mis-align. Always turn
the printer off before turning the platen knob!
!
The factory default setting for the Top of Form (where the
printing should begin) is one inch down from the top of
the page.
!
Your software may print the first line of print above or
below where TOF is set. You may need to adjust the TOF
to meet your software's needs. Use the procedures in the
Printer User's Guide, "Using Your Printer, Top of Form,
Forms Tear-Off Status (ON or OFF)."
!
The first line prints at the red line of the plastic paper
shield (1) on the printhead.
32t-18.eps
1