Telephone Base Installation - AT&T E5640 - 5.8GHZ Spec Answ System User Manual

91-000353-010-000_E5640_R4.qxd
Getting Started

Telephone base installation

Install the telephone base as shown below. Choose a base location away from
electronic equipment, such as computers, computer routers, television sets or
microwave ovens. Avoid excessive heat, cold, dust or moisture.
Plug the large power
adapter into an electrical
outlet not controlled by a
wall switch.
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222-3111.
Be sure to use an electrical outlet not controlled by a wall switch.
7/1/2005 12:22 PM
8
Page 8
Plug telephone
line cord into
telephone jack.