5.8 ghz corded/cordless telephone/answering system with caller id/ call waiting (70 pages)
Summary of Contents for AT&T E5828B
Page 1
Quick start guide E5828B/E1828B 5.8 GHz corded/cordless telephone/answering system with caller ID/ call waiting...
Page 2
Battery installation & charging After installing the battery, you may be able to make or receive short calls. For best performance, place the handset in charger to charge for 16 hours before use. You can keep the battery charged by returning the handset to charger after use. When the battery is fully depleted, a recharge takes about 12 hours.
Telephone base installation Plug the small end of the larg- Plug one end of the tele- Route cords through er power adapter into the power phone line cord into the tel- slots. jack at the bottom of the tele- ephone jack at the bottom phone base.
Quick reference guide Cordless handset DIR /VOLUME+ SELECT/TRANSFER When phone is idle (not in use), Press to store a programming option, or to create a directory entry press to display directory in memory. During a call, press to entries. While entering letters in transfer a call between cordless names, press to advance or press handsets.
Quick reference guide Telephone base CLEAR RINGER VOLUME: CONTRAST • : While using Adjust : Press to adjust menus, press to can- switch on side of base (off, low, screen contrast. cel an operation, or high). exit the menu display. •...