Handset Settings - AT&T E5640 - 5.8GHZ Spec Answ System User Manual

91-000353-010-000_E5640_R4.qxd
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
7/1/2005 12:23 PM
Telephone Operation

Handset settings

At the feature menu you can change settings to
customize how the telephone works.
Press , then use the
MENU
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
Press at any time to cancel an operation, back up
OFF
to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level
(1-6), or turn the ringer off ( 0 ). Use the
tons to hear an example of each volume level, then
press to select the one you prefer.
SELECT
Ringer volume can also be temporarily adjusted by
pressing on the side of the handset during
VOLUME
incoming ringing.
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
^V
tones. Use the buttons to hear an example of
each ringer tone, then press
you prefer.
Key tone
The handset is factory programmed to beep at each key
^V
press. Use the buttons to select
then press to save your preference.
SELECT
NOTE: If you select OFF, you will not hear a beep when you press
keys.
16
Page 16
^V
buttons to scroll to
to select the highlighted item.
^V
to select the one
SELECT
or
ON OFF
but-
,