IBM System x3800 Type 8865 User Manual page 52

40
IBM System x3800 Type 8865: User's Guide
Memory card
retention levers
4. Remove the memory card on which you are installing the DIMM:
a. Open the memory card retention levers on the top of the memory card.
b. While holding the retention levers open, lift the memory card out of the
server.
5. Place the memory card on a flat, static-protective surface with the DIMM
connectors facing up.
Attention: To avoid breaking the DIMM retaining clips or damaging the
DIMM connectors, open and close the clips gently.
6. Open the retaining clip on each end of the DIMM connector.
7. Touch the static-protective package that contains the DIMM to any unpainted
metal surface on the outside of the server; then, remove the DIMM from the
package.