Chapter 4. Configuring The Server; Using The Serverguide Setup And Installation Cd; Using The Configuration/Setup Utility Program - IBM System x3755 Types 7163 Installation Manual

Chapter 4. Configuring the server

The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are specifically designed for your IBM server. Use this CD
during the initial installation of the server to configure basic hardware features and
to simplify the operating-system installation.
In addition to the ServerGuide Setup and Installation CD, you can use the following
configuration programs to customize the server hardware:
v Configuration/Setup Utility program
v Baseboard management controller utility programs
v RAID configuration programs
v Remote Supervisor Adapter II Web interface
For more information about these programs, see "Configuring the server" in the
User's Guide on the IBM System x Documentation CD.

Using the ServerGuide Setup and Installation CD

The ServerGuide Setup and Installation CD provides programs to detect the server
model and installed optional hardware devices, configure the server hardware,
provide device drivers, and help you install the operating system. For information
about the supported operating-system versions, see the label on the CD. If the
ServerGuide Setup and Installation CD did not come with the server, you can
download the latest version from http://www.ibm.com/pc/qtechinfo/MIGR-
4ZKPPT.html.
To start the ServerGuide Setup and Installation CD, complete the following steps:
1. Insert the CD, and restart the server. If the CD does not start, see "ServerGuide
2. Follow the instructions on the screen to:

Using the Configuration/Setup Utility program

Use the Configuration/Setup Utility program to perform the following tasks:
v Change interrupt request (IRQ) settings
v Change the startup drive sequence
v Configure serial-port assignments
v Enable USB keyboard and mouse support
v Resolve configuration conflicts
© Copyright IBM Corp. 2009
– IBM ServeRAID Configuration Utility program
– ServeRAID Manager
problems" on page 51.
a. Select your language.
b. Select your keyboard layout and country.
c. View the overview to learn about ServerGuide features.
d. View the readme file to review installation tips about your operating system
and adapter.
e. Start the setup and hardware configuration programs.
f. Start the operating-system installation. You will need your operating-system
CD.
29