Related Documentation - IBM LS42 - BladeCenter - 7902 Installation And User Manual

The double-width (LS42 Type 7902) of blade server is shown in the following
illustration.
A set of blank labels comes with the blade server. When you install the blade server
in the BladeCenter unit, write identifying information on a label and put the label on
the BladeCenter unit bezel. See the documentation for your BladeCenter unit for
recommended label placement.
Important: Do not put the label on the blade server itself or in any way block the
ventilation holes on the blade server.

Related documentation

This Installation and User's Guide contains general information about the blade
server, including how to install supported optional devices and how to configure the
blade server. The following documentation also comes with the blade server:
v Problem Determination and Service Guide
v Safety Information
v Warranty and Support Information
This document is in Portable Document Format (PDF) on the IBM Documentation
CD. It contains information to help you solve problems yourself, and it contains
information for service technicians.
This document is in PDF on the IBM Documentation CD. It contains translated
caution and danger statements. Each caution and danger statement that appears
in the documentation has a number that you can use to locate the corresponding
statement in your language in the Safety Information document.
This document is in PDF on the IBM Documentation CD. It contains information
about the terms of the warranty and getting service and assistance.
3
Chapter 1. Introduction