Before Using The Cooktop; Locations Ofthesurface Elements - Electrolux Induction/2 - EW30CC55GW 30" Hybrid Cooktop Use And Care Manual

Before Using the Cooktop
ABOUTTHECE MJC G SS COOKTOP
[] [] [] [] [] [] [] [] Ill [] Ill [] [] m ill [] [] [] I m [] []
Fig J- 30"Model - Cooktop
The ceramic cooktop has radiant and induction surface elements located below
the surface of the glass. The design of the ceramic cooktop outlines the area of
the surface element underneath. Make sure the diameter of the pan matches
the diameter of the element outline on the cooktop (See Figs. 1 & 2).
Heat is transferred up through the surface of the cooktop to the cookware Only
flat-bottom cookware should be used. The type and size of cool, ware, the
number of surface elements in use and their settings are all factors that will affect
the amount of heat that will spread to areas beyond the surface elements. The
areas surrounding the elements may become hot enough to cause burns.
Fig.2- 36"Model. Cooktop
LOCATIONS OFTHESURFACE ELEMENTS
Fig. 3 - 30" cookSop
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Fig. 4 =36" cooktop
Your cooktop is equipped with radiant and induction surface elements with
different wattage ratings. The ability to heat food quicker and in largervotumes
increases as the element wattage increases.
The surface elements are located on the 30" cooktop as follows:
= 1 small radiant element located at the left rear position;
- 1 dual radiant element located at the left front position;
- 1 small induction element located at the right rear positionl
- 1 dual induction element located at the right front position.
The surface elements are located on the 36" cooktop as follows:
- 1 small radiant elements located at the center rear position;
- 2 dual radiant elements located at the left front and rear positions;
- 1 small induction element located at the right rear position;
- 1 dual induction element located at the right front position.