Lan Settings; Dhcp - 3Com OfficeConnect 3CRWE53172 User Manual

38 C 4: R S W
HAPTER UNNING THE ETUP IZARD
6 IP settings must be used when establishing a PPTP connection. Fill in the
Initial IP Address and the Initial Subnet Mask fields if your ISP has
provided you with these settings. Alternatively, if the PPTP server is
located in your DSL modem, click Suggest to select an IP address on the
same subnet as the PPTP server.

LAN Settings

Figure 23 LAN IP Address Screen
This screen displays a suggested LAN IP address and subnet mask of the
Gateway. It also allows you to change the IP address and subnet mask.

DHCP

The Gateway contains a Dynamic Host Configuration (DHCP) server that
can automatically configure the TCP/IP settings of every computer on
your network.
Figure 24 DHCP Server Setup Screen
To activate the DHCP Server option, select Enable the DHCP server with
the following settings: and specify the IP pool range. The largest available
continuous IP pool will be automatically entered; if this is not appropriate,